PSU Faculty Profiles

Assistant Professor

08/27/2019 - 03/09/2021 Prince Sultan University Riyadh,Saudi Arabia

Ali Mehboob Mehboob A.,Hassan Mehboob Mehboob H.,Abdelhak Ouldyerou Ouldyerou A.,Imad Barsoum Barsoum I.

Materials and Design 2024-04-01,
Computational biomechanical analysis of Ti-6Al-4V porous bone plates for lower limb fractures

Ali Mehboob Mehboob A.,Imad Barsoum Barsoum I.,Hassan Mehboob Mehboob H.,Rashid K. Abu Al-Rub Abu Al-Rub R.K.,Abdelhak Ouldyerou Ouldyerou A.

Virtual and Physical Prototyping 2024-01-01,
Topology optimization and biomechanical evaluation of bone plates for tibial bone fractures considering bone healing

Abdelhak Ouldyerou Ouldyerou A.,Hassan Mehboob Mehboob H.,Ali Mehboob Mehboob A.,Ali Merdji Merdji A.,Laid Aminallah Aminallah L.,Osama M. Mukdadi Mukdadi O.M.,Imad Barsoum Barsoum I.,Harri Junaedi Junaedi H.

PLoS ONE 2023-12-01,
Biomechanical performance of resin composite on dental tissue restoration: A finite element analysis

Hassan Mehboob Mehboob H.,Abdelhak Ouldyerou Ouldyerou A.,Muhammad Farzik Ijaz Ijaz M.F.

Applied Sciences (Switzerland) 2023-06-01,
Biomechanical Investigation of Patient-Specific Porous Dental Implants: A Finite Element Study

Khaled Akkad Akkad K.,Hassan Mehboob Mehboob H.,Rakan Alyamani Alyamani R.,Faris Tarlochan Tarlochan F.

Journal of Functional Biomaterials 2023-03-01,
A Machine-Learning-Based Approach for Predicting Mechanical Performance of Semi-Porous Hip Stems

Abdelhak Ouldyerou Ouldyerou A.,Ali Merdji Merdji A.,Laid Aminallah Aminallah L.,Hassan Mehboob Mehboob H.,Ali Mehboob Mehboob A.,Sandipan Roy Roy S.,Tarun Goswami Goswami T.,Osama M. Mukdadi Mukdadi O.M.,Faris Tarlochan Tarlochan F

Composites Communications 2023-02-01,
Functionally graded ceramics (FGC) dental abutment with implant-supported cantilever crown: Finite element analysis

Furqan Ahmad Ahmad F.,Fethi Abbassi Abbassi F.,Hassan Mehboob Mehboob H.,Farooq Ahmed Ahmed F.,Sajjad Miran Miran S.

ICCM International Conferences on Composite Materials 2023-01-01,
Behavior of Paperboard with Interacting Circular Holes Under Tensile Loading Using Three-Dimensional Digital Image Correlation

Waseem Arif Arif W.,Tahir Abbas Jauhar Jauhar T.A.,Sajjad Miran Miran S.,Furqan Ahmad Ahmad F.,Farooq Ahmed Ahmed F.,Himansh Kumar Kumar H.,Hassan Mehboob Mehboob H.,Ashish Saxena Saxena A.

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2023-01-01,
Evaluation of dissimilar TIG welded joints of novel high strength low alloy steel for automotive applications: Experiment and numerical comparative approach

Ali Mehboob Mehboob A.,Hassan Mehboob Mehboob H.

Engineering Materials 2023-01-01,
Bioinspired Polymer Composite Implants

Hassan Mehboob Mehboob H.

Composite Structures 2023-01-01,
Biomechanical performance evaluation of composite metamaterial implant with 3D printing approach for lumbar interbody fusion surgery: A finite element study

Abdelhak Ouldyerou Ouldyerou A.,Laid Aminallah Aminallah L.,Ali Merdji Merdji A.,Ali Mehboob Mehboob A.,Hassan Mehboob Mehboob H.

Mechanics of Advanced Materials and Structures 2023-01-01,
Finite element analyses of porous dental implant designs based on 3D printing concept to evaluate biomechanical behaviors of healthy and osteoporotic bones

Mohamed Toumi Nasri Nasri M.T.,Fethi Abbassi Abbassi F.,Furqan Ahmad Ahmad F.,Wardi Makhloufi Makhloufi W.,Mahfoudh Ayadi Ayadi M.,Hassan Mehboob Mehboob H.,Heung Soap Choi Choi H.S.

Mechanics of Advanced Materials and Structures 2023-01-01,
Experimental and numerical investigation of sheet metal failure based on Johnson-Cook model and Erichsen test over a wide range of temperatures

Abdelhak Ouldyerou Ouldyerou A.,Hassan Mehboob Mehboob H.,Ali Merdji Merdji A.,Laid Aminallah Aminallah L.,Ali Mehboob Mehboob A.,Osama M. Mukdadi Mukdadi O.M.

Computers in Biology and Medicine 2022-11-01,
Biomechanical analysis of printable functionally graded material (FGM) dental implants for different bone densities

Abdelhak Ouldyerou Ouldyerou A.,Ali Merdji Merdji A.,Laid Aminallah Aminallah L.,Sandipan Roy Roy S.,Hassan Mehboob Mehboob H.,Mutlu Özcan Ozcan M.

Journal of the Mechanical Behavior of Biomedical Materials 2022-10-01,
Biomechanical performance of Ti-PEEK dental implants in bone: An in-silico analysis

Ali Mehboob Mehboob A.,Hassan Mehboob Mehboob H.,Yasir Nawab Nawab Y.,Seung Hwan Chang Hwan Chang S.

Materials and Design 2022-09-01,
Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures

Hassan Mehboob Mehboob H.,Ali Mehboob Mehboob A.,Fethi Abbassi Abbassi F.,Furqan Ahmad Ahmad F.,Seung-Hwan Chang Chang S.-H.

Composite Structures 2022-06-01,
Finite element analysis of biodegradable Ti/polyglycolic acid composite bone plates based on 3D printing concept

Khalid Ansari Ansari K.,Shantanu Khandeshwar Khandeshwar S.,Charuta Waghmare Waghmare C.,Hassan Mehboob Mehboob H.,Tripti Gupta Gupta T.,Avinash N. Shrikhande Shrikhande A.N.,Mohamed Abbas Abbas M.

Materials 2022-05-01,
Experimental Evaluation of Industrial Mushroom Waste Substrate Using Hybrid Mechanism of Vermicomposting and Effective Microorganisms

Naser Fawzi Al Zoubi Zoubi N.F.A.,Faris Tarlochan Tarlochan F.,Hassan Mehboob Mehboob H.

Applied Sciences (Switzerland) 2022-05-01,
Mechanical and Fatigue Behavior of Cellular Structure Ti-6Al-4V Alloy Femoral Stems: A Finite Element Analysis

Muhammad Usama Zaheer Zaheer M.U.,Hassan Mehboob Mehboob H.,Ali Mehboob Mehboob A.,Seung-Hwan Chang Chang S.-H.

Composites Part B: Engineering 2022-03-15,
Evaluation of the effect of bone plate modulus on the early bone healing of fractured tibia

Naser Fawzi Al Zoubi Zoubi N.F.A.,Faris Tarlochan Tarlochan F.,Hassan Mehboob Mehboob H.,Firas Jarrar Jarrar F.

Applied Sciences (Switzerland) 2022-02-01,
Design of Titanium Alloy Femoral Stem Cellular Structure for Stress Shielding and Stem Stability: Computational Analysis

Thokchom Subhaschandra Singh Singh T.S.,Upendra Rajak Rajak U.,Tikendra Nath Verma Verma T.N.,Prerana Nashine Nashine P.,Hassan Mehboob Mehboob H.,A. Muthu Manokar Manokar A.M.,Asif Afzal Afzal A.

Case Studies in Thermal Engineering 2022-01-01,
Exhaust emission characteristics study of light and heavy-duty diesel vehicles in India

Hassan Mehboob Mehboob H.,Ali Mehboob Mehboob A.,Fethi Abbassi Abbassi F.,Furqan Ahmad Ahmad F.,Abdul Samad Khan Khan A.S.,Sajjad Miran Miran S.

Mechanics of Advanced Materials and Structures 2022-01-01,
Bioinspired porous dental implants using the concept of 3D printing to investigate the effect of implant type and porosity on patient's bone condition

Furqan Ahmad Ahmad F.,Hassan Mehboob Mehboob H.,Fethi Abbassi Abbassi F.,Jung-Wuk Hong Hong J.-W.,Jihed Zghal Zghal J.,Ali Mehboob Mehboob A.

Mechanics of Advanced Materials and Structures 2022-01-01,
Numerical investigation to evaluate the energy effect on the impact resistance of an aircraft carbon fiber-reinforced polymer composite

Elumalai Elumalai P.V., Parthasarathy Parthasarathy M.,Joshua Stephen Chellakumar Isaac JoshuaRamesh Lalvani Lalvani J.S.C.I.J.,Hassan Mehboob Mehboob H.,Olusegun David Samuel Samuel O.D.,Christopher C. Enweremadu Enweremadu C.C.,C. Aham

Energy Reports 2021-11-01,
Effect of injection timing in reducing the harmful pollutants emitted from CI engine using N-butanol antioxidant blended eco-friendly Mahua biodiesel

Muhammad Umar Aslam Khan Khan M.U.A.,Saiful Izwan Abd Razaq Abd Razaq S.I.,Hassan Mehboob Mehboob H.,Sarish Rehman Rehman S.,Wafa Shamsan Al-Arjan Al-Arjan W.S.,Rashid Amin Amin R.

Polymers 2021-11-01,
Antibacterial and hemocompatible phresponsive hydrogel for skin wound healing application: In vitro drug release

Muhammad Umar Aslam Khan Aslam Khan M.U.,Mohsin Ali Raza Raza M.A.,Hassan Mehboob Mehboob H.,Mohammed Rafiq Abdul Kadir Abdul Kadir M.R.,Saiful Izwan Abd Razak Abd Razak S.I.,Saqlain A. Shah Shah S.A.,Muhammad Zahir Iqbal Iqbal M.Z.,Ras

RSC Advances 2021-05-14,
Erratum: Development and: In vitro evaluation of κ-carrageenan based polymeric hybrid nanocomposite scaffolds for bone tissue engineering (RSC Adv. (2020) 10 (40529-40542) DOI: 10.1039/D0RA07446B)

Muhammad Umar Aslam Khan Aslam Khan M.U.,Wafa Shamsan Al-Arjan Al-Arjan W.S.,Mona Saad Binkadem Binkadem M.S.,Hassan Mehboob Mehboob H.,Adnan Haider Haider A.,Mohsin Ali Raza Raza M.A.,Saiful Izwan Abd Razak Abd Razak S.I.,Anwarul Hasa

Nanomaterials 2021-05-01,
Development of biopolymeric hybrid scaffold-based on aac/go/nhap/tio<inf>2</inf> nanocomposite for bone tissue engineering: In-vitro analysis

Muhammad Umar Aslam Khan Khan M.U.A.,Saiful Izwan Abd Razak Abd Razak S.I.,Hassan Mehboob Mehboob H.,Mohammed Rafiq Abdul Kadir Abdul Kadir M.R.,T. Joseph Sahaya Anand Anand T.J.S.,Fawad Inam Inam F.,Saqlain A. Shah Shah S.A.,Mahmoud E.

ACS Omega 2021-02-16,
Synthesis and Characterization of Silver-Coated Polymeric Scaffolds for Bone Tissue Engineering: Antibacterial and in Vitro Evaluation of Cytotoxicity and Biocompatibility

Muhammad Umar Aslam Khan Khan M.U.A.,Saiful Izwan Abd Razak Razak S.I.A.,Wafa Shamsan Al Arjan Arjan W.S.A.,Samina Nazir Nazir S., Joseph Sahaya Anand Joseph Sahaya Anand T.,Hassan Mehboob Mehboob H.,Rashid Amin Amin R.

Molecules 2021-02-01,
Recent advances in biopolymeric composite materials for tissue engineering and regenerative medicines: A review

Muhammad Umar Aslam Khan Aslam Khan M.U.,Saiful Izwan Abd Razak Abd Razak S.I.,Wafa Shamsan Al Arjan Al Arjan W.S.,Samina Nazir Nazir S.,T Joseph Sahaya Anand Sahaya Anand T.J.,Hassan Mehboob Mehboob H.,Rashid Amin Amin R.

Molecules (Basel, Switzerland) 2021-01-25,
Recent Advances in Biopolymeric Composite Materials for Tissue Engineering and Regenerative Medicines: A Review

Tamer A. Sebaey Sebaey T.A.,Dipen Kumar Rajak Kumar Rajak D.,Hassan Mehboob Mehboob H.

Composite Structures 2021-01-01,
Internally stiffened foam-filled carbon fiber reinforced composite tubes under impact loading for energy absorption applications

Hassan Mehboob Mehboob H.,Furqan Ahmad Ahmad F.,Faris Tarlochan Tarlochan F.,Ali Mehboob Mehboob A.,Seung Hwan Chang Chang S.H.

Biomechanics and Modeling in Mechanobiology 2020-12-01,
A comprehensive analysis of bio-inspired design of femoral stem on primary and secondary stabilities using mechanoregulatory algorithm

Muhammad Umar Aslam Khan Aslam Khan M.U.,Mohsin Ali Raza Raza M.A.,Hassan Mehboob Mehboob H.,Mohammed Rafiq Abdul Kadir Abdul Kadir M.R.,Saiful Izwan Abd Razak Abd Razak S.I.,Saqlain A. Shah Shah S.A.,Muhammad Zahir Iqbal Iqbal M.Z.,Ras

RSC Advances 2020-11-01,
Development and: In vitro evaluation of κ-carrageenan based polymeric hybrid nanocomposite scaffolds for bone tissue engineering

Ali Mehboob Mehboob A.,Syed Hasan Askari Rizvi Rizvi S.H.A.,Seung-Hwan Chang Chang S.-H.,Hassan Mehboob Mehboob H.

Composites Science and Technology 2020-09-08,
Comparative study of healing fractured tibia assembled with various composite bone plates

Hassan Mehboob Mehboob H.,Faris Tarlochan Tarlochan F.,Ali Mehboob Mehboob A.,Seung-Hwan Chang Chang S.-H., Ramesh Ramesh S.,Wan Sharuzi Wan Harun Harun W.S.W.,Kumaran Kadirgama Kadirgama K.

Journal of Materials Science: Materials in Medicine 2020-09-01,
A novel design, analysis and 3D printing of Ti-6Al-4V alloy bio-inspired porous femoral stem

Ali Mehboob Mehboob A.,Hassan Mehboob Mehboob H.,Seung-Hwan Chang Chang S.-H.

Composites Part A: Applied Science and Manufacturing 2020-08-01,
Evaluation of unidirectional BGF/PLA and Mg/PLA biodegradable composites bone plates-scaffolds assembly for critical segmental fractures healing

Ali Raza Raza A.,Hassan Mehboob Mehboob H.,Sajjad Miran Miran S.,Waseem Arif Arif W.,Syed Farukh Javaid Rizvi Rizvi S.F.J.

Energies 2020-07-01,
Investigation on the characteristics of biodiesel droplets in the engine cylinder

Muhammad Umar Aslam Khan Khan M.U.A.,Hassan Mehboob Mehboob H.,Saiful Izwan Abd Razak Abd Razak S.I.A.,Mohd Yazid Yahya Yahya M.Y.,Abdul Halim Mohd Yusof Yusof A.H.M.,Muhammad Hanif Ramlee Ramlee M.H.,T. Joseph Sahaya Anand Anand T.J.S.

Polymers 2020-06-01,
Development of polymeric nanocomposite (xyloglucan-co-methacrylic acid/hydroxyapatite/SiO<inf>2</inf>) scaffold for bone tissue engineering applications-in-vitro antibacterial, cytotoxicity and cell culture evaluation

Sami Emad Alkhatib Alkhatib S.E.,Hassan Mehboob Mehboob H.,Faris Tarlochan Tarlochan F.

Journal of Bionic Engineering 2019-11-01,
Finite Element Analysis of Porous Titanium Alloy Hip Stem to Evaluate the Biomechanical Performance During Walking and Stair Climbing

Hassan Mehboob Mehboob H.,Park Myung Kyun Kyun P.M.,An-Soo Kang Kang A.S.,Behzad Ahmed Zai Zai B.A.,Rashid Ali Ali R.

24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition 2009, EVS 24 2009-12-01,
Analysis of the clamping pressure effect in PEM fuel cell structure by FEM and experiment

Myung Kyun Park Park M.K.,Rashid Ali Sindhu Sindhu R.A.,Soo Jin Lee Lee S.J.,Behzad Ahmed Zai Zai B.A.,Hassan Mehboob Mehboob H.

International Journal of Precision Engineering and Manufacturing 2009-12-01,
A residual stress evaluation in laser welded lap joint with hole drilling method

Behzad Ahmed Zai Zai B.A., Park Park M.K., Choi Choi H.S.,Hassan Mehboob Mehboob H.,Rashid Ali Ali R.

Journal of Mechanical Science and Technology 2009-11-01,
Effect of moisture absorption on damping and dynamic stiffness of carbon fiber/epoxy composites

Hassan Mehboob Mehboob H.,Park Myung Kyun Kyun P.M.,Kang An-Soo An-Soo K.,Behzad Ahmed Zai Zai B.A.,Rashid Ali Ali R.

EFC 2009 - Piero Lunghi Conference, Proceedings of the 3rd European Fuel Cell Technology and Applications Conference 2009-01-01,
Analysis of the clamping pressure effect in PEM fuel cell structure by fem and experiment